Ø20mm-Ø220mm Diameter
250-3200T Clamping Force
30g-25000g Injection volume 
 

Technical Parameters:
Tempering Hardness：HB280-320
Nitriding Hardness：950-1100HV
Nitriding Depth：0.50-0.80mm 
Nitriding Brittleness：≤ Grade 1
Surface Roughness：Ra 0.4μm
Screw Linearity：0.015mm/m
Hardness of Bimetallic Alloy：HRC60-72
Alloy Depth：0.8-3mm
Hardness of Chromium Plating after Nitriding:：≥950HV
Thickness of Chromium Plating：0.025~0.10mm 

Screw Types：
For different plastic screw can be used: ordinary type, pin type, barrier type,separation type, exhaust type.
 
Parameters:

Shot Volume (g)	Screw Diameter X Length (mm)	Outer Diameter of Barrel X Length (mm)	Shot Volume (g)	Screw Diameter X Length (mm)	Outer Diameter of Barrel X Length (mm)
30-90	Φ30x90	Φ85x860	800-1250	Φ75x1825	Φ170x1725
60-125	Φ35x910	Φ85x860	1000-1500	Φ80x2000	Φ180x1805
100-150	Φ38x935	Φ95x900	1250-2000	Φ85x2300	Φ190x1900
125-160	Φ40x980	Φ95x910	2000-3000	Φ90x2700	Φ210x2000
125-300	Φ42x1030	Φ105x8880	2500-5000	Φ100x2600	Φ230x2405
250-400	Φ45x1210	Φ115x1165	3000-6000	Φ110x2600	Φ256x2590
300-500	Φ50x1300	Φ125x1260	4000-10000	Φ120x2800	Φ256x2800
450-600	Φ55x1335	Φ130x1320	6000-8000	Φ130x3010	Φ256x2970
500-700	Φ56x1350	Φ130x1350	8000-10000	Φ145x3010	Φ256x3200
500-700	Φ60x1380	Φ140x1350	10000-15000	Φ160x3500	Φ270x3200
650-800	Φ65x1415	Φ150x1420	13000-25000	Φ170x3415	Φ317x3380
700-1000	Φ70x1790	Φ160x1685